The updated versions also give a lot of improvements and new functions as e.g.:
From here you can download O-Link v2.0.6 software for programming and controlling OASiS systems.
O-Link Software is back - compatible with previous versions.Minimum recommended PC configuration: CPU 1GHz, RAM 256MB, OS Windows 2000 or higher (XP, Vista, Win 7, Win 8 / 8.1 / 10). The new version (2.0.6) has the following additional feature:
New FW LD62520 supports new functions in (BNL) peripheries to be in compliance with INCERT certification. We strictly recommend to perform upgrade of the GSM dialler by this firmware but only if current FW is marked as LD62xxx. For older firmware can not be used new firmaware used and it is not recommeded to do it!
Nový firmware LD62520 se liší od starého firmwaru (LD62516) podporou nových funkcí pro splnění certifikace INCERT u periferií s označením (BNL). Důrazně doporučujeme provést upgrade komunikátoru tímto firmwarem, pokud je ten stávající označen LD62xxx. Pro starší firmwary označené LD61xxx nelze nový firmware použít a nedoporučuje se jej provádět!
Die neue FW LD62520 unterstützt neue Funktionen in (BNL) Peripherien, die die INCERT-Zertifizierung erfüllen. Es wird dringend empfohlen, eine Aktualisierung des GSM-Wählgeräts dieser Firmware durchzuführen, wenn die aktuelle FW als LD62xxx gekennzeichnet ist. Die neue Firmware kann nicht für ältere Versionen benutzt werden, daher wird davon abgeraten!
Ny FW LD62520 understøtter nye funktioner i (BNL) enheder for at være i overensstemmelse med INCERT certificeringen. Vi anbefaler på det kraftigste at GSM opkaldsfunktionen opgraderes til denne FW hvis den nuværende FW er LD62xxx. Har man en ældre FW end LD62xxx kan den ikke opgraderes, og det er ikke anbefalet at prøve at opgradere.
Nuevo FW LD62520 soporta nuevas funcionalidades en (BNL) periferias para cumplir con la certificación INCERT. Recomendamos encarecidamente realizar la actualización del comunicador GSM a este firmware, pero solo si el FW actual está marcado como LD62xxx. ¡Para un firmware más antiguo no puede ser utilizado el nuevo firmware y no recomendamos hacerlo!
Uusi FW LD62520 tukee uusia toimintoja (BNL) alueilla INCERT-sertifioinnin noudattamiseksi. Suosittelemme voimakkaasti päivittämään GSM-laitteen tällä Firmware-versiolla, mutta vain jos nykyinen FW on merkitty seuraavasti: LD62xxx. Vanhempia Firmware-versioita ei voi päivittää uuteen Firmware-versioon eikä sitä suositella.
Le nouveau micrologiciel LD62520 supporte les nouvelles fonctionnalités périphériques (BNL) devant être conformes à la certification INCERT. Nous recommandons strictement de réaliser la mise à jour du numéroteur GSM avec ce micrologiciel, mais uniquement pour les versions LD62xxx installées du micrologiciel. Pour les versions antérieures, ce micrologiciel ne peut être utilisé et il est totalement déconseillé de procéder à la mise à jour!
Il nuovo FW LD62520 supporta nuove funzioni nelle periferiche (BNL) ai fini della conformità con la certificazione INCERT. Consigliamo vivamente di eseguire l'aggiornamento della composizione numerica GSM mediante questo firmware, ma solo se il FW attuale è contrassegnato come LD62xxx. Per i firmware precedenti non è possibile utilizzare il nuovo firmware ed è fortemente sconsigliato!
Nieuwe FW LD62520 ondersteunt nieuwe functies in de randapparatuur (BNL) om te voldoen aan de certificatie INCERT. We adviseren nadrukkelijk om de GSM-beller up te graden door deze firmware, maar alleen als de huidige FW gemarkeerd is als LD62xxx. Voor een oudere firmware kan de nieuwe firmaware niet worden gebruikt. Het wordt afgeraden dit te doen!
Nye FW LD62520 støtter nye funksjoner i (BNL)-enheter, slik at de skal være i samsvar med INCERT-sertifiseringen. Vi anbefaler sterkt å foreta oppgradering av GSM-oppringeren med denne fastvaren, men kun dersom den aktuelle fastvaren er merket som LD62xxx. For eldre fastvare kan det ikke brukes ny fastvare, og det anbefales å ikke gjøre det!
Nowe oprogramowanie FW LD62520 wspiera nowe funkcje dla (BNL) urządzeń peryferyjnych, aby uzyskać zgodność z certyfikatem INCERT. Zalecamy aktualizację dialera GSM za pomocą tego oprogramowania, ale tylko jeśli obecna wersja oprogramowania firmware jest oznaczona numerem LD62xxx. Nowe oprogramowanie nie może zostać użyte w przypadku starszych wersji firmware i nie zalecamy tego robić!
O novo FW LD62520 suporta novas funções em periféricos (BNL) de forma a cumprir a certificação INCERT. É altamente recomendável proceder à atualização do marcador GSM com este firmware mas apenas se o FW atual estiver identificado como LD62xxx. Em caso de firmwares mais antigos, não é possível utilizar firmware novo e, por esse motivo, a atualização não é recomendada!
Новое микропрограммное обеспечение LD62520 поддерживает новые функции в (BNL) периферийных устройствах для обеспечения соответствия с сертификацией INCERT. Настоятельно рекомендуем обновить GSM дозвонщик этим микропрограммным обеспечением, но только если текущее микропрограммное обеспечение имеет маркировку LD62xxx. В случае более старых версий микропрограммного обеспечения новое микропрограммное обеспечение использовать нельзя и не рекомендуется!
Ny FW LD62520 stöder nya funktioner i (BNL) tillbehör för att vara kompatibelt med INCERT-certifiering. Vi rekommenderar starkt att uppgradera GSM-uppringaren med den här inbyggda programvaran men bara om aktuell FW är markerad som LD62xxx. Ny inbyggd programvara kan inte användas istället för äldre och det rekommenderas inte att man gör det!
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
Zde si můžete stáhnout software ComLink pro nastavování a ovládání systémů JA-60 Comfort (od verze roku 2002), JA-63 Profi a JA-65 Maestro, pro připojovací interface JA-80T, PC-60B, PC-60A nebo modem JA-60U.
Verze 65 je potřebná pro ústřednu s fw gk61012 nebo vyšším (paměť pro 255 událostí).
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 7/8/8.1/10.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 9x/2000/XP.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
This version is needed for a control panel with fw gk61012 or higher (255 events memory).
ComLink software works correctly with Windows 9x/2000/XP.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
ComLink software works correctly with Windows 9x/2000/XP.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
ComLink software works correctly with Windows 9x/2000/XP.
From here you can download ComLink software for programing and controlling the
JA-60 Comfort (versions after 2002), JA-63 Profi and JA-65 Maestro systems. Also for JA-80T, PC-60B, and PC-60A interfaces and JA-60U modems.
ComLink software works correctly with Windows 9x/2000/XP.
Latest A-Link package version 1.1.1.654 to download (AZOR firmware LO60313)
Note: This version includes innovative certificate for antivirus software. Nowadays operating systems require it.
How to update:
| 1. | Make sure that the communicator is powered by a power supply before starting the upgrade |
| 2. | Connect the communicator to your PC via a USB cable. |
| 3. | Run the A-Link program on the newly assigned communicator logical drive. |
| 4. | Please check the version of firmware in your Azor (click the "Version" tab and check the "Firmware" field). If your firmware is LO60309 or higher, go to step no.10. |
| 5. | Download fwp update and save the latest fwp software to your hard drive. |
| 6. | In the main menu select the "Communicator" tab - choose "Update software". |
| 7. | Select the file with a *.fwp extension from the folder, where you saved it (step 5). |
| 8. | Follow the instructions on the screen and wait till the update is finished. |
| 9. | The A-Link program stops and performs a communicator restart. As a confirmation, two LEDs flash with a blue color. |
| 10. | Download fwx update and also save the latest fwx software to your hard drive (it is a second file). |
| 11. | a) Run the A-Link program again and it performs the second step of the update itself using the file with a *.fwx extension from the folder, where you saved it (step 10). b) If the firmware version in your Azor is LO60309 or higher, in the main menu select the "Communicator" tab - choose "Update software". Select the file with a *.fwx extension from the folder, where you saved it (in step 10). |
| 12. | The A-Link program stops and performs a communicator restart. Wait for approx. 2 minutes till the red LED (labeled GSM) goes off. |
| 13. | The firmware in the communicator and the A-Link software are now up-to-date and ready to be used again. |
Latest A-Link package version 1.1.1.654 to download (AZOR firmware LO60312)
How to update:
| 1. | Make sure that the communicator is powered by a power supply before starting the upgrade |
| 2. | Connect the communicator to your PC via a USB cable. |
| 3. | Run the A-Link program on the newly assigned communicator logical drive. |
| 4. | Please check the version of firmware in your Azor (click the "Version" tab and check the "Firmware" field). If your firmware is LO60309 or higher, go to step no.10. |
| 5. | Download fwp update and save the latest fwp software to your hard drive. |
| 6. | In the main menu select the "Communicator" tab - choose "Update software". |
| 7. | Select the file with a *.fwp extension from the folder, where you saved it (step 5). |
| 8. | Follow the instructions on the screen and wait till the update is finished. |
| 9. | The A-Link program stops and performs a communicator restart. As a confirmation, two LEDs flash with a blue color. |
| 10. | Download fwx update and also save the latest fwx software to your hard drive (it is a second file). |
| 11. | a) Run the A-Link program again and it performs the second step of the update itself using the file with a *.fwx extension from the folder, where you saved it (step 10). b) If the firmware version in your Azor is LO60309 or higher, in the main menu select the "Communicator" tab - choose "Update software". Select the file with a *.fwx extension from the folder, where you saved it (in step 10). |
| 12. | The A-Link program stops and performs a communicator restart. Wait for approx. 2 minutes till the red LED (labeled GSM) goes off. |
| 13. | The firmware in the communicator and the A-Link software are now up-to-date and ready to be used again. |
Configuration software for the GD-04K, GD-02K-DIN, GD-04 & GD-02-DIN devices.
The software includes the latest firmware and an automatic update of available versions.
Copyright: When using the website or any documents provided by companies belonging to the JABLOTRON group, you are obliged to comply with all obligations enshrined in the relevant Czech and European legal regulations. Any unauthorized copying, processing, spreading, commercializing, publishing, modifying, displaying, distributing, storing, transmitting, reproducing, communicating, or other use of the materials, information content, copyright and industrial property rights, including images, names, logos, and trademarks of the companies falling under the JABLOTRON group, is strictly prohibited. This applies to any form of use beyond the scope of cases permitted by law, especially for commercial purposes (i.e., for the purpose of achieving direct or indirect economic or business benefit) without the prior written consent of the respective rights owner. The accessibility of websites or any documents provided by companies belonging to the JABLOTRON group does not grant you any authorization or license to further distribute (i.e., to reproduce, expand, rent, lend, exhibit, or further communicate to the public) any content mentioned in them. All rights reserved © Jablotron 2024
