JA-122PB Bus combined PIR motion and glass break detector
The detector uses a PIR sensor for human movement detection. Breaking glass is detected by a GBS sensor, which analyses air pressure changes and sounds to detect the breaking of a glass window. The detector should be installed by a trained technician with a valid certificate issued by an authorized distributor.
Technical specifications
| Power | from the control panel bus 12 V (8–15 V) |
|---|---|
| Quiescent current consumption | 2.4 mA |
| Maximal current consumption | 12.8 mA |
| Recommended installation height | 2.5 m above the floor |
| PIR detection angle/range | 90°/12 m |
| GBS detection angle/range | 90°/9 m |
| Dimensions | 150 x 63 x 40 mm |
| Weight (w/o batteries) | 135 g |
| Classification | Security grade 2/Environmentální class II according to EN 50131-1 |
| Environment | indoor general |
| Operating temperature range | -10 °C to +40 °C |
| Average operational humidity | 75% RH, w/o condensation |
| Certification body | Trezor Test s.r.o. (no. 3025) |
| In compliance with | EN 50130-4, EN 55032, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1 |
| Recommended screw | 2 x ø 3.5 x 40 mm (countersunk head) |
Related products
JA-196PL-L The dual PIR and MW wall holder
The bracket has been designed for the installation of a dual PIR and MW detector, the JA-122PW or the JA-162PW onto a plasterboard or brick wall. Thanks to this way of installation the detector is partly flush-mounted and fits the wall in a very elegant way.
