JA-111H-AD TRB Bus module for system control
This built-in module can be directly integrated into the control device.
One input of the module has a fixed Tamper signal, several set signals can be selected for the second input and the third input serves either to report a fault of the connected device, or it can be used as the second control conductor with a fixed “Unset” signal.
- The module can be used to control programmable PG outputs.
- It allows you to set a minimum activation time for the controller (0.1 s - 300 s).
- The detector features impulse activation for dual-conductor control as well as status control for single-conductor control.
- The module is a component of the JABLOTRON 100+ system, is addressable and occupies one position in the system.
Technical specifications
| Power | from control panel BUS 12 V DC (9 … 15 V) |
|---|---|
| Current consumption - Nominal consumption - to calculate backup | 8 mA all inputs connected to GND (+ consumption of connected devices) |
| Current consumption - Maximal consumption - for cable selection | 12 mA (+ consumption of connected devices) |
| Maximum allowed current of the connected detector | 50 mA |
| Dimensions | 16 x 30 x 12 mm |
| Weight | 8 g |
| Classification | Security grade 2 / environmental class II |
| - according to | EN 50131-1, EN 50131-3 (ACE type B) |
| - environmental | Indoor general |
| - operating temperature range | -10 °C to +40 °C |
| - average humidity | 75 % RH non condensing |
| Also complies with | EN 50130-4, EN 55022 |
