JA-151ST Wireless combined smoke and heat detector with built-in siren
The JA-151ST detector uses wireless communication and it is powered with three AA batteries. The detector should be installed by a trained technician with a valid with a valid manufacturer’s certificate.
The detector indicates a fire hazard using the built-in LED indicator and acoustic signalling.
The JA-151ST consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light. It is very sensitive to large dust particles which are present in dense smoke. It is less sensitive to smaller particles generated by the combustion of liquids such as alcohol. That is why the fire detector also contains a built-in heat detector which has a slower reaction but is much better at detecting fire which generates only a small amount of smoke.
Technical specifications
Power | 3 x Alkaline battery type LR6 (AA) 1.5 V/2.4 Ah Please note: Batteries are not included |
---|---|
Typical lifetime | approx. 3 years |
Smoke detection | optical light scattering |
Smoke detector sensitivity | m = 0.11 ÷ 0.13 dB/m pursuant to EN 14604:2005, EN 54-7 |
Heat detection | class A1 according to EN 54-5 |
Alarm temperature | +60 °C to +65 °C |
Communication band | 868.1 MHz, Jablotron protocol |
Effective Radiated Power (ERP) | 10 mW |
Communication range | approx. 300 m (unrestricted area) |
Dimensions | diameter 126 mm, height 50 mm |
Weight | 150 g |
Operating temperature range | -10 °C to +65 °C |
Also complies with | EN 54-25, ETSI EN 300 220, EN 60950-1, EN 50130-4 and EN 55022. |
Can be operated according to | ERC REC 70-03 |
Recommended screw | 2x ø 3.5 x 40 mm (countersunk head) |
Similar products
JA-150ST Wireless fire and temperature detector
The JA-150ST optical wireless smoke and temperature detector detects fire inside residential or commercial premises. It allows these settings: smoke and heat, smoke or heat, smoke only, heat only.
Related products
BAT-1V5-AA Alkaline battery
Alkaline battery
SD-TESTER Test Spray Smoke Sabre
Smoke Sabre Test Spray is designed to test the functionality of Jablotron’s optical smoke detectors. Contains 150 ml of testing aerosol
PLV-P-ST Universal ceiling circular spacer
Universal ceiling circular spacer, for smoke and temperature detectors
ACC-S3.5X40 Wood screws.
Suitable for wall-mounting of most alarm devices. Pozidrive type.
ACC-D-UX5R UX 5 R Universal plastic wall plugs for screws.
Suitable for wall-mounting of most alarm devices.