JA-162PW-AN Wireless dual PIR and MW motion detector - anthracite
The detector features a white lens that provides standard white light immunity as defined by the norm (up to 6000 lux). The immunity to false alarms can be set at two levels, PIR and MW. The detector operates with a pulse reaction and takes up a single position in the system.
This device is compatible with JA-103K, JA-107K, JA-102K control panel units and upper models.
Technical specifications
| Power supply | 2x lithium battery, type: CR123A (3 V/1500 mAh) Please note: Batteries are not included. |
|---|---|
| Typical lifetime of batteries | 4 Years |
| LowBatt state | < 2,7 V |
| Quiescent current consumption | 65 μA |
| Maximum current consumption | 50 mA |
| Communication band | 868,1 MHz, JABLOTRON protocol |
| Maximum radio-frequency power (ERP) | 25 mW |
| Communication range | cca 300 m (open area) |
| Recommended installation height | 2.2 – 2.5 m above floor level |
| Detection angle/detection coverage PIR | 90°/12 m |
| Detection angle/detection coverage MW | 80°/12 m |
| Operational frequency MW | 24,125 GHz |
| Maximum radio-frequency power (ERP) | 30 mW |
| Dimensions | 63 x 150 x 40 mm |
| Weight (w/o batteries) | 125 g |
| Classification | Security grade 2/Environmental class II (according to EN 50131-1) |
| Operating temperature range | -10 °C to +40 °C |
| Average operating humidity | 75 % RH, w/o condensation |
| Certification body | Trezor Test s.r.o. (no. 3025) |
| In compliance with | ETSI EN 300 220-1,-2, ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4, EN 50131-5-3, EN 50131-6 |
| Operating conditions according to general authorization | ERC REC 70-03 |
Related products
BAT-3V0-CR123A Lithium battery
Lithium battery
ACC-S3.5X40 Wood screws.
Suitable for wall-mounting of most alarm devices. Pozidrive type.
ACC-D-UX5R UX 5 R Universal plastic wall plugs for screws.
Suitable for wall-mounting of most alarm devices.
