JA-150A II Wireless internal siren

A wireless siren for indoor use, the JA-150A II is designed for acoustic alarm signaling, as well as entrance and exit delays and PG output activations in the security system.

Wireless internal siren

JA-150A II Wireless internal siren

Has a button with programmable functions.

Addressable and occupies one control panel logical position.

Technical specifications

Power supply/wattage 110 - 230 V/50 - 60 Hz, 0.6 W, protection class II
Connecting cables - maximum diameter 1.5 mm2
Backup/recharge time min. 24 h/max 72 h
Battery type BAT-3V2-CR2/LiFePo4
Warning: Battery is not installed
Battery/lifetime 3.2 V; 470 mAh/3 years
Battery/minimum voltage when loaded 3.0 V
Battery/maximum voltage when unloaded 3.6 V
Communication band 868.1 MHz, JABLOTRON protocol
Communication range approx. 300 m (open area)
Classification security grade 2/environmental class II
- According to EN 50131-1
- Alarm sound level 100 dB/1 m (±5 dB/1 m)
- Back up power supply type W/24h back up
- Operational environment indoor general
- Operating temperature range -10 °C to +40 °C
- Average operational humidity 75 % RH, non-condensing
- Certification body Trezor Test s.r.o. (no. 3025)
IP rating IP43 according to EN 50131-1
Dimensions 80 x 80 x 35 mm
Also complies with ETSI EN 300 220, EN 50130-4+A1:2014, EN 55032:2015, EN 62368-1, EN 50131-5-3, EN 50581:2012, EN 50131-4, EN 50131-6
Can be operated according to ERC REC 70-03

Similar products

JA-152A Wireless internal siren for an AC socket

The product is a wireless system device for the JABLOTRON 100+ . The siren is designed to indicate alarms inside a building. It can also be used for other acoustic indications such as activation of PG outputs, entry/exit delay or as a door bell.

JA-154A Wireless battery indoor siren

The wireless siren can be easily mounted anywhere within range of the system radio. Flexible installation is made possible by power from 3 AA batteries.