The cameras expand your security options. Thanks to the MyJABLOTRON application, your property can be fully monitored without having to constantly watch the phone. The system automatically generates a one minute recording recording of every event from the JABLOTRON 100+ alarm thus providing an instant overview.
The cameras expand your security options. Thanks to the MyJABLOTRON application, your property can be fully monitored without having to constantly watch the phone. The system automatically generates a one minute recording recording of every event from the JABLOTRON 100+ alarm thus providing an instant overview.
Automatic recording 30 seconds before and after an alarm.
Multi-day recording of alarms over the last 3 or 7 days.
Live video from the camera that can be run anytime to check the situation.
The cameras are part of the JABLOTRON 100+ security system and automatically react to its status, whether it is an alarm, setting or unsetting the building.
The user receives a minute-by-minute recording of every event in the MyJABLOTRON application. Allowing instant verification of the situation.
The entire system can be connected to a security centre, whose operators take care of everything. If there is an alarm, it contacts the owner and sends a response unit.
For all products, besides the 2-year warranty, you also get up to 5 years of extended servicing support.
The cameras use cloud communication to securely store data. It cannot therefore be stolen or deleted. Moreover, all communications are encrypted and safeguarded against misuse.
Camera |
No. of pixels |
Resolution |
Camera angle |
IR auxiliary lighting area |
Sensor | Power supply |
Communication interface |
JI-111C | 2 Mpix |
Full HD |
115° | 30 m |
1/2,8" CMOS |
PoE (802.3af) / 12 V | RJ-45 10M/100M Ethernet |
JI-112C | 2 Mpix |
Full HD |
90° | 50 m |
1/2,8" CMOS |
PoE (802.3af) / 12 V | RJ-45 10M/100M Ethernet |
Switch on your camera and connect it to the Internet. Simply register it in MyCOMPANY by reading the QR code.
All you need to do after reading the code is to assign a name to the camera. Everything else is set automatically in the MyCOMPANY application.
The camera is immediately available for the user in the MyJABLOTRON application in the Gallery tab and you can display its preview.
Do you have any additional questions about our products and services?
Get in touch with one of our local partners that work with a wide network….